Energy Transfer Hinges

Product Brief: The Energy Transfer Hinge (ETH) is the ideal way to pass low voltage power form the hinge jamb to the lockset without having any exposed wires. These hinges are commonly used with electric mortise & Cylindrical locks, electric strikes (when on a pair of doors), electric exit trims, latch pullback devices, door mounted card readers and low voltage door lights. The ETH hinges come in a variety of sizes, finishes and wire configurations. Each Hinge is tested to ensure trouble-free operation.

Technical Data: Area of application: Area of application: Any application where low voltage power must be transferred from the hinge jamb to the door

Door Dimensions:
Suitability for various types of door dimensions can be found in hinge selection chart. Same rules as normal ball bearing hinges apply on selection of the right size of power transfer hinges.

Plastic wire access cap for added wire protection.

Centered access holes on most 5 knuckle hinges make for an easier installation

Options: All types of ULL Full Mortise Ball Bearing Hinges can be modified as power/electric transfer hinge. 4ʼ lead available.

Certifications: UL/cUL Listed:

Configurations:

• ETH2W – 2 Wire – 20 gauge – 4A@24V (per pair)
• ETH42/6W — 4/6 Wire – 26 gauge – 1A@24V (per pair)
• ETH8W/10W/12W — 8/10/12 Wire – 28 gauge – 1A@24V (per pair)
• ETH2WH — 2 Wire – 18 gauge – 5A (16 amp in-rush for 300 ms.)
• ETH4WH – ETH12WH — 4 – 12 Wire – 2 wires 18 ga. +2-10 wires 28 ga.

Product Brief: The Energy Transfer Monitor Hinge (ETM) like the ETH hinge is the ideal way to pass low voltage power from the hinge jamb to the lockset. There are no exposed wires, cables or switches that can be tampered with and the hinge maintains the same appearance of a conventional non-power transfer hinges. What distinguishes it from the ETH hinges is that it has a concealed switching mechanism that monitors the position of the door. We can modify almost any hinge and we maintain a large inventory of most major hinge brands in various sizes and finishes. Contact us if you donʼt see what you need listed.

Technical Data: Area of application: Any application where low voltage power must be transferred from the hinge jamb to the door and monitoring of the door position is required.

Door Dimensions: Suitability for various types of door dimensions can be found in hinge selection chart. Same rules as normal ball bearing hinges apply on selection of the right size of power transfer hinges.

Plastic wire access cap for added wire protection. Centered access holes on most 5 knuckle hinges make for an easier installation.

Options: All types of ULL Full Mortise Ball Bearing Hinges can be modified as power/electric transfer monitor hinge.

Configurations:

• ETM2W — Monitor w/2 Wire – 20 gauge – 4A@24V
• ETM4W — Monitor w/4 Wire – 26 gauge – 1A@24V
• ETM6W — Monitor w/6 Wire – 26 gauge – 1A@24V
• ETH8W — Monitor w/8 Wire – 28 gauge – 1A@24V

HOW TO ORDER